The radio of all types of Renault cars becomes inactive after replacing the battery or connecting and disconnecting the battery connections or changing the fuse, etc. and to solve this problem, please read the following steps.

Reactivating the Renault car radio by entering wrong codes such as 1111-1234-0000 and other serial numbers will not be activated, and this will only disable and disable the code entry page and delay the time of entering the code and displaying the code entry page. Throw .
So, do not enter another code until you are absolutely sure that you have the radio broadcasting exclusive code, every time you enter the wrong code, the code entry page will become inactive and inaccessible with increasing time.

So, in order to get your permanent unlock code, follow the method below and contact us so that your radio station can be activated and usable again in the shortest possible time.

To access the barcode of the radio transmitter, which is required to order the radio transmitter code, it is necessary to remove the radio transmitter from the installation site in order to access this barcode


Renault media nav speaker wire colour identification. AMP install *** Solved *** | Independent Renault Forums

This is an example of a Renault car radio broadcast barcode.

After sending the barcode image, please do not install the radio broadcasting device until the quality and image of the barcode are confirmed by our WhatsApp support, and after confirming the quality of the barcode, you will be notified to install the broadcast.

 

Renault Duster, Renault Symbol, Renault Twingo, Renault Clio, Renault Logan, Renault Megane, Renault Fluence, Renault Safran, Renault Scala, Renault Trafic and other Renault products can be reactivated by the mentioned method, and you need to visit in person It is not in any agency or repair shop.

 

To remove the radio, you can see some tutorials on our Instagram page, and according to your training tips, remove the radio from the installation site and access the image of the barcode label.

 

 

 

 Please pay attention.


Broadcast barcode is required to unlock Renault radio.

To access the barcode of the Renault Captur-Zaster-Symbol car radio and the models that have a touch radio with a large panel, it is necessary to first remove the decorative cover on the radio and then open the 4 screws holding the radio and take out the radio.

 

And if your broadcast barcode was similar to this example and the end of the lower digits of the lower barcode of the label ends with the letter R, you should remove the small sticker pasted above and take a picture of the lower barcode and send it again, so that it is similar to the barcodes The example above has 15 digits and ends with a number. 👇🏻👇🏻👇🏻

Community-verified icon

Do not install the player until you have taken a picture of the main digits of the barcode and make sure that you have the following 15 digits of this label available, which ends with a number from 0 to 9.